Version 3.3.0
Cursor operations

Common operations in WiredTiger are performed using WT_CURSOR handles. A cursor includes:

  • a position within a data source
  • getter/setters for key and value fields
  • encoding of fields to store in the data source
  • methods to navigate within and iterate through the data

Opening a cursor

Cursors are created using the WT_SESSION::open_cursor method. For example, from the program ex_cursor.c:

error_check(session->open_cursor(session, "table:world", NULL, NULL, &cursor));

Another example from the same program:

error_check(
session->open_cursor(session, "table:world(country,population)", NULL, NULL, &cursor));

In addition to traditional data sources, cursors in WiredTiger are used to access projections and even created data sources such as the run-time statistics:

error_check(session->open_cursor(session, "statistics:", NULL, NULL, &cursor));

See Cursors for more information on available cursor types.

Closing a cursor

Cursors remain open until either WT_CURSOR::close is called or the cursor's session is closed, which may either be in WT_SESSION::close or WT_CONNECTION::close.

Positioning a cursor

Cursors may be positioned at the beginning of the data source, the end of the data source, at an exact key within the data source, and near a key within the data source.

To invalidate the position of a cursor so that subsequent iterations start from the beginning or end of the data source, use the WT_CURSOR::reset method:

int
cursor_reset(WT_CURSOR *cursor)
{
return (cursor->reset(cursor));
}

To move a cursor forward in the data source, use the cursor WT_CURSOR::next method:

int
cursor_forward_scan(WT_CURSOR *cursor)
{
const char *key, *value;
int ret;
while ((ret = cursor->next(cursor)) == 0) {
error_check(cursor->get_key(cursor, &key));
error_check(cursor->get_value(cursor, &value));
}
scan_end_check(ret == WT_NOTFOUND);
return (0);
}

If the WT_CURSOR::next method is called on a cursor without a position in the data source, it is positioned at the beginning of the data source.

To move a cursor backward in the data source, use the cursor WT_CURSOR::prev method:

int
cursor_reverse_scan(WT_CURSOR *cursor)
{
const char *key, *value;
int ret;
while ((ret = cursor->prev(cursor)) == 0) {
error_check(cursor->get_key(cursor, &key));
error_check(cursor->get_value(cursor, &value));
}
scan_end_check(ret == WT_NOTFOUND);
return (0);
}

If the WT_CURSOR::prev method is called on a cursor without a position in the data source, it is positioned at the end of the data source.

To position a cursor at a specific location in the data source, use the WT_CURSOR::search method:

int
cursor_search(WT_CURSOR *cursor)
{
const char *value;
cursor->set_key(cursor, "foo");
error_check(cursor->search(cursor));
error_check(cursor->get_value(cursor, &value));
return (0);
}

To position a cursor at or near a location in the data source, use the WT_CURSOR::search_near method:

int
cursor_search_near(WT_CURSOR *cursor)
{
const char *key, *value;
int exact;
cursor->set_key(cursor, "foo");
error_check(cursor->search_near(cursor, &exact));
switch (exact) {
case -1: /* Returned key smaller than search key */
error_check(cursor->get_key(cursor, &key));
break;
case 0: /* Exact match found */
break;
case 1: /* Returned key larger than search key */
error_check(cursor->get_key(cursor, &key));
break;
}
error_check(cursor->get_value(cursor, &value));
return (0);
}

Cursor positions do not survive transactions: cursors that are open during WT_SESSION::begin_transaction, WT_SESSION::commit_transaction or WT_SESSION::rollback_transaction will lose their position as if WT_CURSOR::reset was called.

Cursors can be configured to move to a random position with WT_CURSOR::next is called, see Cursor random for details.

Inserting and updating

To insert new data, and optionally update existing data, using a cursor, use the WT_CURSOR::insert method:

int
cursor_insert(WT_CURSOR *cursor)
{
cursor->set_key(cursor, "foo");
cursor->set_value(cursor, "bar");
return (cursor->insert(cursor));
}

To update existing data using a cursor, use the WT_CURSOR::update method:

int
cursor_update(WT_CURSOR *cursor)
{
cursor->set_key(cursor, "foo");
cursor->set_value(cursor, "newbar");
return (cursor->update(cursor));
}

To remove existing data using a cursor, use the WT_CURSOR::remove method:

int
cursor_remove(WT_CURSOR *cursor)
{
cursor->set_key(cursor, "foo");
return (cursor->remove(cursor));
}

The WT_SESSION::open_cursor overwrite configuration is true by default, causing WT_CURSOR::insert, WT_CURSOR::remove and WT_CURSOR::update to ignore the current state of the record, and these methods will succeed regardless of whether or not the record previously exists.

When an application configures overwrite to false, WT_CURSOR::insert will fail with WT_DUPLICATE_KEY if the record previously exists, and WT_CURSOR::update and WT_CURSOR::remove will fail with WT_NOTFOUND if the record does not previously exist.

Cursor position after error

After any cursor handle method failure, the cursor's position is undetermined. For cursor operations that expect a key to be set before the operation begins (including WT_CURSOR::search, WT_CURSOR::insert, WT_CURSOR::update and WT_CURSOR::remove), the application's key and value will not be cleared by an error.

Applications that cannot re-position the cursor after failure must duplicate the cursor by calling WT_SESSION::open_cursor and passing the cursor as the to_dup parameter before calling a cursor method that will attempt to re-position the cursor. Cursor duplication is not supported for the backup, config and statistics cursor types.

Cursor key/value memory scoping

When applications pass a pointer (either to a WT_ITEM or a string), to WT_CURSOR::set_key or WT_CURSOR::set_value, WiredTiger does not copy the memory referenced by the pointer. For this reason, the application must keep the referenced memory unchanged and valid until the next operation that successfully positions the cursor, modifies the underlying data, or the cursor is reset or closed (discarding its resources). The operations that position the cursor are WT_CURSOR::next, WT_CURSOR::prev, WT_CURSOR::search and WT_CURSOR::search_near; the operations that modify the underlying data are WT_CURSOR::insert, WT_CURSOR::update and WT_CURSOR::remove.

If a cursor operation fails (for example, due to a WT_ROLLBACK error), it may be retried without calling WT_CURSOR::set_key or WT_CURSOR::set_value again. That is, the cursor may still reference the application-supplied memory until the cursor is successfully positioned, underlying data is modified, or the cursor is closed or reset.

Any pointers returned by WT_CURSOR::get_key or WT_CURSOR::get_value are only valid until a subsequent cursor call that successfully positions the cursor, modifies the underlying data, or the cursor is reset or closed. These pointers may reference private WiredTiger data structures that may not be modified or freed by the application. If a longer scope is required, the application must make a copy of the memory before the cursor is re-used, closed or reset.

WT_CURSOR::prev
int prev(WT_CURSOR *cursor)
Return the previous record.
WT_SESSION::open_cursor
int open_cursor(WT_SESSION *session, const char *uri, WT_HANDLE_NULLABLE(WT_CURSOR) *to_dup, const char *config, WT_CURSOR **cursorp)
Open a new cursor on a data source or duplicate an existing cursor.
WT_CURSOR::get_key
int get_key(WT_CURSOR *cursor,...)
Get the key for the current record.
WT_CURSOR
A WT_CURSOR handle is the interface to a cursor.
Definition: wiredtiger.in:211
WT_CURSOR::search
int search(WT_CURSOR *cursor)
Return the record matching the key.
WT_CURSOR::next
int next(WT_CURSOR *cursor)
Return the next record.
WT_CURSOR::reset
int reset(WT_CURSOR *cursor)
Reset the cursor.
WT_CURSOR::get_value
int get_value(WT_CURSOR *cursor,...)
Get the value for the current record.
WT_CURSOR::search_near
int search_near(WT_CURSOR *cursor, int *exactp)
Return the record matching the key if it exists, or an adjacent record.
WT_CURSOR::set_value
void set_value(WT_CURSOR *cursor,...)
Set the value for the next operation.
WT_CURSOR::remove
int remove(WT_CURSOR *cursor)
Remove a record.
WT_CURSOR::update
int update(WT_CURSOR *cursor)
Update an existing record and optionally insert a record.
WT_CURSOR::set_key
void set_key(WT_CURSOR *cursor,...)
Set the key for the next operation.
WT_NOTFOUND
#define WT_NOTFOUND
Item not found.
Definition: wiredtiger.in:3734
WT_CURSOR::insert
int insert(WT_CURSOR *cursor)
Insert a record and optionally update an existing record.