Version 3.2.1
Custom Data Sources

Applications can implement their own custom data sources underneath WiredTiger using the WT_DATA_SOURCE interface. Each data source should support a set of methods for a different URI type (for example, in the same way WiredTiger supports the built-in type "file:", an application data source might support the type "dsrc:").

Applications register their WT_DATA_SOURCE interface implementations with WiredTiger using the WT_CONNECTION::add_data_source method:

static WT_DATA_SOURCE my_dsrc = {my_alter, my_create, my_compact, my_drop, my_open_cursor,
my_rename, my_salvage, my_size, my_truncate, my_range_truncate, my_verify, my_checkpoint,
my_terminate, my_lsm_pre_merge};
error_check(conn->add_data_source(conn, "dsrc:", &my_dsrc, NULL));

WT_DATA_SOURCE methods

Any of the WT_DATA_SOURCE methods may be initialized to NULL. Calling uninitialized WT_DATA_SOURCE methods through a WiredTiger API will result in an "operation not supported" error. For example, an underlying data source that does not support a compaction operation should set the compact field of their WT_DATA_SOURCE structure to NULL.

WT_DATA_SOURCE::create method

When implementing a custom data source, you may want to consider the 'r' key and 't' value formats, and whether or not they should be implemented.

The 'r' key format indicates keys are uint64_t typed record numbers. In this case, cursor methods will be passed and/or return a record number in the recno field of the WT_CURSOR structure.

Cursor methods for data sources supporting fixed-length bit field column-stores (that is, a store with an 'r' type key and 't' type value) should accept and/or return a single byte in the value field of the WT_CURSOR structure, where between 1 and 8 of the low-order bits of that byte contain the bit-field's value. For example, if the value format is "3t", the key's value is the bottom 3 bits.

WT_CURSOR methods

The WT_DATA_SOURCE::open_cursor method is responsible for allocating and returning a WT_CURSOR structure. The only fields of the WT_CURSOR structure that should be initialized by WT_DATA_SOURCE::open_cursor are a subset of the underlying methods it supports.

The following methods of the WT_CURSOR structure must be initialized:

No other methods of the WT_CURSOR structure should be initialized, for example initializing WT_CURSOR::get_key or WT_CURSOR::set_key will have no effect.

Incorrectly configuring the WT_CURSOR methods will likely result in a core dump.

The data source's WT_CURSOR::close method is responsible for discarding the allocated WT_CURSOR structure returned by WT_DATA_SOURCE::open_cursor.

WT_CURSOR::insert method

Custom data sources supporting column-stores (that is, a store with an 'r' type key) should consider the append configuration string optionally specified for the WT_DATA_SOURCE::open_cursor method. The append string configures WT_CURSOR::insert to allocate and return an new record number key.

Custom data sources should consider the overwrite configuration string optionally specified for the WT_DATA_SOURCE::open_cursor method. If the overwrite configuration is true, WT_CURSOR::insert, WT_CURSOR::remove and WT_CURSOR::update should ignore the current state of the record, and these methods will succeed regardless of whether or not the record previously exists.

When an application configures overwrite to false, WT_CURSOR::insert should fail with WT_DUPLICATE_KEY if the record previously exists, and WT_CURSOR::update and WT_CURSOR::remove will fail with WT_NOTFOUND if the record does not previously exist.

Custom data sources supporting fixed-length bit field column-stores (that is, a store with an 'r' type key and 't' type value) may, but are not required to, support the semantic that inserting a new record after the current maximum record in a store implicitly creates the missing records as records with a value of 0.

WT_CURSOR key/value fields

Custom data source cursor methods are expected to use the recno, key and value fields of the WT_CURSOR handle.

The recno field is a uint64_t type and is the record number set or retrieved using the cursor when the data source was configured for record number keys.

The key and value fields are WT_ITEM structures. The key.data, key.size, value.data and value.size fields are read by the cursor methods storing items in the underlying data source and set by the cursor methods retrieving items from the underlying data source.

Error handling

Some specific errors should be mapped to WiredTiger errors:

  • attempts to insert an existing key should return WT_DUPLICATE_KEY
  • failure to find a key/value pair should return WT_NOTFOUND
  • fatal errors requiring the database restart should return WT_PANIC

Otherwise, successful return from custom data source methods should be indicated by a return value of zero; error returns may be any value other than zero or an error in WiredTiger's Error handling. A simple approach is to always return either a system error value (that is, errno), or WT_ERROR. Error messages can be displayed using the WT_SESSION::msg_printf method. For example:

/*
* If an underlying function fails, log the error and then return a non-zero value.
*/
if ((ret = data_source_cursor()) != 0) {
(void)wt_api->err_printf(wt_api, session, "my_open_cursor: %s", data_source_error(ret));
return (WT_ERROR);
}

Configuration strings

Parsing configuration strings

Configuration information is provided to each WT_DATA_SOURCE method as an argument. This configuration information can be parsed using the WT_EXTENSION_API::config method, and is returned in a WT_CONFIG_ITEM structure.

For example, the append, overwrite key_format and value_format configuration strings may be required for the WT_DATA_SOURCE::open_cursor method to correctly configure itself.

A key_format value of "r" indicates the data source is being configured to use record numbers as keys. In this case initialized WT_CURSOR methods must take their key value from the cursor's recno field, and not the cursor's key field. (It is not required that record numbers be supported by a custom data source, the WT_DATA_SOURCE::open_cursor method can return an error if an application attempts to configure a data source with a key_format of "r".)

The WT_DATA_SOURCE::open_cursor method might retrieve the boolean or integer value of a configuration string as follows:

int my_data_source_overwrite;
/*
* Retrieve the value of the boolean type configuration string
* "overwrite".
*/
error_check(wt_api->config_get(wt_api, session, config, "overwrite", &v));
my_data_source_overwrite = v.val != 0;
int64_t my_data_source_page_size;
/*
* Retrieve the value of the integer type configuration string
* "page_size".
*/
error_check(wt_api->config_get(wt_api, session, config, "page_size", &v));
my_data_source_page_size = v.val;

The WT_DATA_SOURCE::open_cursor method might retrieve the string value of a configuration string as follows:

const char *my_data_source_key;
/*
* Retrieve the value of the string type configuration string
* "key_format".
*/
error_check(wt_api->config_get(wt_api, session, config, "key_format", &v));
/*
* Values returned from WT_EXTENSION_API::config in the str field are not
* nul-terminated; the associated length must be used instead.
*/
if (v.len == 1 && v.str[0] == 'r')
my_data_source_key = "recno";
else
my_data_source_key = "bytestring";

Creating data-specific configuration strings

Applications can add their own configuration strings to WiredTiger methods using WT_CONNECTION::configure_method.

WT_CONNECTION::configure_method takes the following arguments:

  • the method being extended, where the name is the concatenation of the handle name, a period and the method name. For example, "WT_SESSION.create" would add new configuration strings to the WT_SESSION::create method, and "WT_SESSION.open_cursor" would add the configuration string to the WT_SESSION::open_cursor method.
  • the object type of the data source being extended. For example, "table:" would extend the configuration arguments for table objects, and "my_data:" could be used to extend the configuration arguments for a data source with URIs beginning with the "my_data" prefix. A NULL value for the object type implies all object types.
  • the additional configuration string, which consists of the name of the configuration string and an optional default value. The default value is specified by appending an equals sign and a value. For example, for a new configuration string with the name "device", specifying either "device=/path" or "device=35" would configure the default values.
  • the type of the additional configuration, which must one of "boolean", "int", "list" or "string".
  • value checking information for the additional configuration, or NULL if no checking information is provided.

For example, an application might add new boolean, integer, list or string type configuration strings as follows:

/* my_boolean defaults to true. */
error_check(conn->configure_method(
conn, "WT_SESSION.open_cursor", NULL, "my_boolean=true", "boolean", NULL));
/* my_integer defaults to 5. */
error_check(
conn->configure_method(conn, "WT_SESSION.open_cursor", NULL, "my_integer=5", "int", NULL));
/* my_list defaults to "first" and "second". */
error_check(conn->configure_method(
conn, "WT_SESSION.open_cursor", NULL, "my_list=[first, second]", "list", NULL));
/* my_string defaults to "name". */
error_check(conn->configure_method(
conn, "WT_SESSION.open_cursor", NULL, "my_string=name", "string", NULL));

Once these additional configuration calls have returned, application calls to the WT_SESSION::open_cursor method could then include configuration strings such as my_boolean=false, or my_integer=37, or my_source=/home.

Additional checking information can be provided for int, list or string type configuration strings.

For integers, either or both of a maximum or minimum value can be provided, so an error will result if the application attempts to set the value outside of the acceptable range:

/*
* Limit the number of devices to between 1 and 30; the default is 5.
*/
error_check(conn->configure_method(
conn, "WT_SESSION.open_cursor", NULL, "devices=5", "int", "min=1, max=30"));

For lists and strings, a set of valid choices can also be provided, so an error will result if the application attempts to set the value to a string not listed as a valid choice:

/*
* Limit the target string to one of /device, /home or /target; default to /home.
*/
error_check(conn->configure_method(conn, "WT_SESSION.open_cursor", NULL, "target=/home",
"string", "choices=[/device, /home, /target]"));
/*
* Limit the paths list to one or more of /device, /home, /mnt or
* /target; default to /mnt.
*/
error_check(conn->configure_method(conn, "WT_SESSION.open_cursor", NULL, "paths=[/mnt]", "list",
"choices=[/device, /home, /mnt, /target]"));

WT_COLLATOR

Custom data sources do not support custom ordering of records, and attempting to create a custom data source with a collator configured will fail.

Serialization

WiredTiger does not serialize calls to the WT_DATA_SOURCE methods or to cursor methods configured by WT_DATA_SOURCE::open_cursor, and the methods may be called from multiple threads concurrently. It is the responsibility of the implementation to protect any shared data. For example, object operations such as WT_DATA_SOURCE::drop might not be permitted while there are open cursors for the WT_DATA_SOURCE object.